Micro Art Studio

Micro Art Studio

Link:
http://www.microartstudio.com/

Artikel von Micro Art Studio können auch über Planet Fantasy dem Betreiber/Sponsor dieses Fourms bezogen werden.
Wendet euch dort über den Schalter "Kontakt" oben rechts auf der Starseite an den Betreiber und euch wird sicher geholfen.

Inhalt:
Figuren (Fantasy/SF)
Geländestücke
Bases
Geländezubehör wie Kisten, Straßenlaternen usw.

Maßstab:
28mm

Land:
Polen

Beispielbilder:

 

[Major König]

Auch wenns vielleicht etwas ketzerisch ist, das einen "roten" zu fragen, aber welche art von geruecht ist das jetzt? :huh:😀

 

[lobo]

WIP Micro Art SciFi buildings.

 

[FrederTM]

Cooles Gedöns. Sehr infinityesque und interessant mit den Hexfeldern.

 

[Jormungand]

Cooles Gedöns. Sehr infinityesque und interessant mit den Hexfeldern.

Könnte in der Natur der Sache liegen, da MAS quasi "offizieller Partner" von CB ist...

 

[lobo]

Coming soon - Radar Station

The set will consist of foam building, hdf radar, footbridges and resin door.

Approximate size of the foam building:
Length: 25,5cm / 10 inch
Width: 19,5 cm / 7 inch
Height: 7,5 cm / 3 inch

Approximate size of the HDF radar:
Length: 15,5cm / 6 inch
Width: 7,5 cm / 3 inch
Height: 7,5 cm / 3 inch

 

[Tegres]

Die sieht doch sogar recht brauchbar für Wh40K aus :thumbsup::thumbsup::thumbsup::thumbsup: für dieses schlichte, aber überzeugende Design.

 

[DeusExMachina]

Leider Recht Teuer mit fast 40€ aber so viele braucht man ja nicht davon.

 

[Ferox21]

Hmm, die Radarstation gefällt mir auch. Passt halt wie gesagt zu Infinity und sogar in der dargestellten Bauweise auch zu 40k. 40 Euro sind allerdings auch etwas happig. Da ist man wieder schon versucht zu sagen, dass GWs Gelände da billiger ist...

 

[lobo]

Ancient Bases, Round 25mm

Ancient Bases, Round 40mm

Ancient Bases, Round 60mm#1

Ancient Bases, Ellipse 60mm#2

Ancient Bases, Ellipse 120mm

Jungle Bases, Round 25mm

Jungle

Jungle Bases, Round 40mm

Jungle Bases, Round 60mm

Jungle Bases, Ellipse 120mm

Wraithstone Bases, Round 40mm

 

[lobo]

Neu:

Rubber Moulds - Armour: Scales, Folds, Eagle, Skull

We're releasing new rubber moulds. We know that this ones were not the most requested

(We're still trying to design good looking chainmail mould

but We think that for every one who wants to have customised terminators it will be a nice addition.

Also I want to say that due to the holiday season We're not able to make immediately tutorials about this product line. But after the Summer I try to make my best to prepare for you photo tutorials: How to use our moulds in the most efficient way

This moulds were prepared to eneble easy customization of your miniatures shoulder pads and leg guards (especially for terminators). But you can use those ornaments on any surface.
The ornament surface on shoulder pad module is approx. 1,8cm[0,7"] x 1,28cm[0,5"]
The ornament surface on leg guards module is approx. 1,9cm[0,8"] x 1,6cm[0,6"]

Rubber Moulds - Armour Scales

Rubber Moulds - Armour Folds

Rubber Moulds - Armour Eagle

Rubber Moulds - Armour Skull

 

[lobo]

Preview:
Infinity Holoboards

Quelle: o-12.de
Angekündigt für Anfang September, ein Set zwischen 14 und 18 €

 

[lobo]

Neu:

Shale Bases WRound 30mm (5) 4.92 Euro

 

[lobo]

Bases Mosaic, 20x20mm

Bases Mosaic, 25x25mm

Bases Mosaic, 50x50mm

Bases Mosaic, Cavalry 25x50mm

Bases Mosaic, Round 25mm

Barracks

The set consists of 2 foam barrack buildings, a watchtower of HDF and 2 resin Security Entrances #3

Approximate size of the foam building:
Length: 13,4cm / 5,3 inch
Width: 12,4 cm / 4,9 inch
Height: 6,4 cm / 2,5 inch

Approximate size of the HDF watchtower:
Length: 8,6 cm / 3,4 inch
Width: 8,6 cm / 3,4 inch
Height: 18 cm / 7 inch

All HDF parts (high-density fiberboard of 3mm thickness) are designed to slot together in a way that allows for a quick and easy assembly.
Barracks are made from high quality structure Hardfoam. Hardfoam is lightweight, durable and easy to cut with a knife or fretsaw.
Resin Security Entrance #3 has been made from high quality resin.

Attention:
Before taking the elements out make sure they are fully cut. There are minor connections that prevent them from falling out. It may be necessary to glue some parts of the model.

 

[Der Wanst]

Mal ne Frage...
Sind die neuen Sets (zb. der Wachturm) zusammengesteckt oder sehen die nur so aus? Warte auf Antwort.😉

 

[lobo]

Am Wachtrum kann man gut sehen das die gesteckt sind.

Man bekommt 3mm dicke HDF Platten die gelasert sind und man muß die Teile dann noch an einigen Stellen trennen. Fast wie ein Plastegußrahmen.

 

[Der Wanst]

Thx 😉

 

[lobo]

Disctrict 5 - Apartment 1

We wanted to show you the final look of our new HDF terrain. The product is available in our on-line store. In one set you will get three storeys and the price will be something around 30€

There's a thread about these on the official Infinity forums. There'll be an expansion set with interior walls, and acrylic inserts for the windows - clear and smoked grey at the very least. There are also some billboards that fit onto the outside corners of the buildings, and their existing walkways connect to those balconies.

 

[lobo]

We are proudly presenting you the new models based on the world of Wolsung – the Steam Pulp Fantasy roleplaying game, and designed for Wolsung Steampunk Skirmish Game, which we are currently working on. The game will introduce three competing clubs: the Ash and Oak – a place for the richest, wealthiest and most adventurous ladies and gentleman on the planet; the Eccentric Scientists Club – technology freaks and home of the strangest inventions, and The Triad of the Lotus Dragon – the mysterious orkish organisation from the far east.

Today's additions include Master Xen Jidao, Ata Kijao - the Orc Kunoichi, and minor members of the Triad: Fishermen and Traders. They are followed by an Eccentric Scientist Snorri Rottstein on his golemic flea. Enjoy!

Master Xen Jidao

Ata Kijao - the Orc Kunoichi

Orc Trader

Orc Trader is modular and can be assembled in different ways.
In the kit you will find 6 pieces: two different heads, two different right hands and additional part which can be glued on the back.

Fishermen

Snorri Rottstein on his golemic flea

 

[lobo]

News on Essen Spiel fair, 2011-10-17

o ho ho.... Christmas is approaching again

and We at Micro Art Studio know that you need time to prepare your presents. Because of that We want to announce that at this Essen Spiele fair we have a huge update to your Discworld Miniatures line

5 new minis. And here are pics of two of theme

Der Tod

Elf Albert