Colosus - 3D printable STL truck for 28mm miniatures

Iceeagle85

Tabletop-Fanatiker
26 November 2005
14.904
1.132
96.476
38
Braucht jemand nen Alternativen Landtrain? Dann hat EnCobertura was für euch, den Colosus:

The Colosus is a 28-35mm Sci-Fi post-apocalyptic wargame land train, with everything you need to cross the wasteland: containers, trailers, crates, drums, self-defence weaponery, and an armoured truck!

It has been designed for SLA resin 3D printers. The model includes different assembly combinations. In addition, a lot of new variantes will be unlocked from the stretch goals, upgrading the set.

COLOSUS TRAILER


The complete land train is 38cm length, and each additional trailer increase it 15cm!
c2486f3f58d3152d2021685a52b1568c_original.jpg


The platforms can be used for containers, groups of crates...
45c14d58a885c9270935e57468e6cbd9_original.jpg


The doors can be opened in this container option...
2eed5ca6d5e6acb64df83f75550d094f_original.jpg


...but keep them closed when the riot starts!
15544978ff78b85b50b343dd29a925bf_original.jpg


This set is composed by dozens of high detailed STL objets. The pre-supported options is available


The core set includes all shown in the picture below:

3792d8c912f4d6ec7e7e16a37aa5e25c_original.jpg

  • An inner cover, for platform-free options
  • Simple hollow containers with two options: with and wihout turret sockets
  • High detailed containers with two options: with and wihout turret sockets
  • The Colosus truck tractor and trailer, with hitch parts
  • Basic weapons set: two types of heavy stubbers (drum and box magazine options), a grenade launcher, and two types of turrets ("gunner" and "robotized")
  • Four types of crates and a stackable drum
 
  • Like
Reaktionen: sejason und senex